Report Created By Duplicating An Existing Report - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

9. You can continue to further enhance this report using the Report Editor. To change the formatting of the
table you would use the Presentation Options; to remove a column you would use the Output Series
option; to restrict the data in the table you would use a filter, for example, a source filter to limit by NAS
IP address; a classification group would enable you to carry out statistical analysis, for example,
grouping by NAS IP address.

Report Created by Duplicating an Existing Report

To create an Average Traffic Volume per NAS report by duplicating the Average Traffic Volume per User
report, you would need to do the following.
1. Select the Average traffic volume per user report from the list of reports.
2. Click the
Traffic Volume per User.
3. Click the Copy of Average Traffic Volume per User report.
4. Click the
5. Click Report Type in the Report Editor. You need to change the name of the report and its description.
The new report will be called "Average traffic volume per NAS".
6. Click the
7. Click Data Source in the Report Editor. Ensure that you have the correct fields selected. For this new
report you need to select the nas_ip_address field. You may also want to deselect the username field
as it will no longer be used.
8. Click the
9. Click Statistics in the Report Editor. The total_users field needs to be changed to reflect the change in
the report. You may also want to alter the field description.
10. Click the total_users field and then click the
Amigopod 3.7 | Deployment Guide
Duplicate link. This creates a copy of the report which will be titled Copy of Average
Edit link to open the Report Editor.
Save Changes button to return to the Report Editor.
Save Changes button to return to the Report Editor.
Edit link.
Report Management | 277