Configuring Access Code Logins; Customize Random Username And Passwords - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual


The print template cannot be edited or deleted.

cannot be deleted and the permissions for the print template cannot be modified.

The permissions for the print template cannot be modified.

The permissions for the print template can be modified, if the operator has the Object Permissions
privilege.

Configuring Access Code Logins

This section explains how to configure the Guest Manager to create multiple accounts that have the ability
to log in in with only the username. We will refer to this as an Access Code. Access Code logins requires
the following plugin versions: Amigopod RADIUS Services 3.0.4 or later, and GuestManager Plugin 3.0.3. To
verify you have the correct plugin versions installed, navigate to Administrator > Plugin Manager >
Manage Plugins and check the version number in the list.

Customize Random Username and Passwords

In this example we will set the random usernames and passwords to be a mix of letters and digits.
1. Navigate to Customization > Guest Manager. The Customize Guest Manager field appears.
2. In the Username Type field, select Random Letters and digits. Note that the generator matching the
complexity will also include a mix of upper and lower case letters.
3. In the Username Length field, select 8 characters.
4. Configure other settings. See
then click
200 | Guest Management
Read-only access – the print template is visible in the list, and the settings for it may be viewed.
Update access – the print template is visible in the list, and may be edited. The print template
Update and delete access – the print template is visible in the list, and may be edited or deleted.
Full access (ownership) – the print template is visible in the list, and may be edited or deleted.
"Default Settings for Account Creation"
Save Configuration to save your changes.
in this chapter for a description,
Amigopod 3.7 | Deployment Guide