Chapter 8 Administrator Tasks; Accessing Administrator; Network Setup - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

The Amigopod Administrator provides tools used by a network administrator to perform both the initial
configuration and ongoing maintenance of the Amigopod Visitor Management Appliance.

Accessing Administrator

Use the Administrator command link on the Amigopod Visitor Management Appliance home page to access
the system administration features.
Alternatively, use the Administrator navigation menu to jump directly to any of the system administration
features.

Network Setup

The Network Setup command allows you to configure the system's network interfaces and other related
network parameters. To access network setup and configuration tasks, choose Administrator > Network
Setup in the left menu.
A summary of the system's current network configuration is displayed on the Network Setup page, and the
results of the network connectivity test are shown below the summary. Additional commands on the
Network Setup page let you navigate to various network configuration tasks.
Amigopod 3.7 | Deployment Guide
Chapter 8
Administrator Tasks
Administrator Tasks | 281