Managing Vlan Interfaces - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Use the Create a VLAN interface link to create a new network interface with a specific VLAN tag. The
Create a New VLAN form is displayed.
In this form, select the physical interface through which the VLAN traffic will be routed, and enter a name
for the VLAN and the corresponding VLAN ID. Use a descriptive name for the VLAN Name field, as this is
only used by administrators to identify the network interface. The corresponding VLAN ID is used by the
network infrastructure to identify a specific virtual LAN. You can enter a value between 1 and 4094
inclusive. The VLAN ID cannot be changed after the VLAN interface has been created. To specify a different
VLAN IDs, you will need to create a new VLAN interface.
Click the Create VLAN button to create a new network interface with the corresponding VLAN
identifier.
Your network infrastructure must support tagged 802.1Q packets on the physical interface selected. VLAN
ID 1 is often reserved for use by certain network management components; avoid using this ID unless you
know it will not conflict with a VLAN already defined in your network.

Managing VLAN Interfaces

After creating a VLAN interface, you will be returned to the Network Interfaces list view to edit the
properties of the new interface.
VLAN network interfaces have the same properties as a physical network interface. Refer to the Amigopod
Deployment Guide or the online help for additional details about setting the properties for the interface.
The VLAN Name that is displayed in the list of network interfaces may be modified here. See "Changing
Network Interface Settings" in this chapter for details about the remaining network interface settings,
which may be configured for a VLAN interface in the same way as a physical network interface.
Amigopod 3.7 | Deployment Guide Administrator Tasks | 289