Ldap Translation Rules - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Table 13 LDAP Error Messages (Continued)
773
775
Other items to consider when troubleshooting LDAP connection problems:
Verify that you are using the correct LDAP version – use ldap:// for version 2 and ldap3:// to specify

LDAP version 3.
Verify that you are using an SSL/TLS connection – use ldaps:// or ldap3s:// as the prefix of the

Server URL.
Verify that the Bind DN is correct – the correct DN will depend on the structure of your directory,

and is only required if the directory does not permit anonymous bind.
Verify that the Base DN is correct – the Base DN for user searches is fixed and must be specified as

part of the Server URL. If you need to search in different Base DNs to match different kinds of operators,
then you should define multiple LDAP Servers and use the priority of each to control the order in which
the directory searches are done.

LDAP Translation Rules

LDAP translation rules specify how to determine operator profiles based on LDAP attributes for an
authenticated operator.
Translation rules may be created by navigating to Administrator > Operator Logins > LDAP
Translation Rules then clicking the
Amigopod 3.7 | Deployment Guide
User must reset password
User account is locked
Create new LDAP translation rule link.
Operator Logins | 125