Changing Network Interface Settings - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Delete – Remove a network interface. Manually created network interfaces may be deleted—for

example, tunnel, VLAN, or secondary interfaces. The standard system network interfaces cannot be
deleted.
Routes – Define static routes that specify the gateway IP addresses for other networks.

Bring Down – Disables the network interface.

Bring Up – Enables the network interface.


Changing Network Interface Settings

The Network Interface Settings form can be used to configure network addressing and other properties
of the network interface.
To change the configuration of a network interface, choose Administrator > Network Setup > Network
Interfaces to display the Network Interfaces List. Click the network interface's row in the list, then click
the Edit command. The row expands to provide configuration options.
Use the Configuration drop-down list to select the IP address configuration method for the network
interface. LAN and MGT network interfaces may be configured for automatic settings using DHCP or
BOOTP, or can be manually configured for an IP address. When you choose one of these settings from the
Configuration drop-down list, additional options are displayed.
To configure the network interface using DHCP, select Automatic settings using DHCP. When using

automatic settings, you can also mark the Automatically obtain DNS server addresses check box to
use DNS server information provided by the DHCP server.
284 | Administrator Tasks Amigopod 3.7 | Deployment Guide