Editing Self-Registration Pages - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

The Register Page is the name of a page that does not already exist. There are no spaces in this name. This
page name will become part of the URL used to access the self provisioning page. For example, the default
"guest_register" page is accessed using the URL guest_register.php.
Click the
process is displayed.
Click the
Once a self registration page has been created you are able to edit, delete, duplicate or go to it, providing
self-registration has been enabled.

Editing Self-Registration Pages

The guest self-registration process is displayed in graphical form, shown below in See
workflow for the guest is shown using solid orange arrows, while the administrator workflow is shown with
dotted blue arrows. To access this page in the WebUI:
1. Navigate to Customization > Guest Self-Registration
2. Select an entry in the Guest Self-Registration list, then click Edit.
3. The Customize Guest Registration workflow page appears, as shown below
Amigopod 3.7 | Deployment Guide
Save Changes button to save the self registration page. A diagram of the self registration
Save and Continue button to proceed to the next step of the setup.
Figure 24. The
Guest Management | 183