Ldap Operator Server Troubleshooting - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Select any of the LDAP servers in the list to display options to perform the following actions on the selected
server:
Edit—changes the properties of an LDAP server

Delete—removes the server from the LDAP server list

Duplicate—creates a copy of an LDAP server

Disable—temporarily disables a server while retaining its entry the server list

Enable—reenables a disabled LDAP server

Ping—sends a ping message (echo request) to the LDAP server to verify connectivity between the

LDAP server and the Amigopod console
Test Auth—adds a Test Operator Login area in the LDAP servers form that allows you to test

authentication of operator login values.
Test Lookup—adds a Test Operator Lookup form in the LDAP servers list that allows you to look

up sponsor names. This option is only available if sponsor lookup has been enabled for the server on the
Edit Authentication Server page.

LDAP Operator Server Troubleshooting

You can use the LDAP Operator Servers list to troubleshoot network connectivity, operator authentication,
and to look up operator usernames.
Testing Connectivity
To test network connectivity between an LDAP server and the Amigopod server, click the
the server's row. The results of the test appear below the server entry in the LDAP server table.
Testing Operator Login Authentication
1. To test authentication of operator login values, select a server name in the LDAP Server table, then click
the
2. Enter an operator username and password for the LDAP Server.
3. (Optional) Click the Advanced check box to display detailed authorization information for the specified
operator.
4. Click
Authentication Test area is added above the server names to indicate the test's progress.
Amigopod 3.7 | Deployment Guide
Test Auth link. The Test Operator Login area is added to the page.
Log In to attempt to authenticate the LDAP server, or click
Ping link in
Cancel to cancel the test. The
Operator Logins | 123