Supported Mibs - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

SNMP version 2c has only one configuration option, which is the name of the community string. SNMP
clients must provide this value in order to access the server. The default community string is public.
SNMP version 3 adds authentication and encryption capabilities to the protocol. You must supply a set of
credentials to be used for SNMP v3 access. You can also select whether encryption should be used.
Traps are notification messages sent when certain conditions are reached. A trap server and community
string may be provided. Currently there are no defined SNMP trap messages.
Click the
immediately.

Supported MIBs

The SNMP server currently supports the following MIBs:
DISMAN-EVENT-MIB

HOST-RESOURCES-MIB

IF-MIB

IP-FORWARD-MIB

IP-MIB

IPV6-MIB

MTA-MIB

NET-SNMP-AGENT-MIB

NET-SNMP-EXTEND-MIB

NOTIFICATION-LOG-MIB

RFC1213-MIB

SNMP-FRAMEWORK-MIB

SNMP-MPD-MIB

SNMP-TARGET-MIB

SNMP-USER-BASED-SM-MIB

SNMPv2-MIB

Amigopod 3.7 | Deployment Guide
Save Changes button to apply the new SNMP server settings. The settings will take effect
Administrator Tasks | 299