Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual page 411

Table 47 General Configuration Settings (Continued)
Value
log_auth_goodpass = no
lower_user = no
lower_pass = no
nospace_user = no
nospace_pass = no
rfc2868_zero_tag = no
allow_authorize_only = no
Amigopod 3.7 | Deployment Guide
Description
Log correct passwords with the authentication requests. Allowed values are no and
yes.
Convert the username or password to lowercase "before" or "after" attempting to
authenticate. If set to "before", the server will first modify the request and then try to
authenticate the user. If set to "after", the server will first attempt to authenticate using
the values provided by the user. If that fails it will reprocess the request after
modifying it as you specify below. This is as close as Amigopod can get to case
insensitivity. It is the admin's job to ensure that the username on the auth db side is
also lowercase to make this work. Allowed values: before, after, no
Some users like to enter spaces in their username or password incorrectly. To save
yourself the tech support call, you can eliminate those spaces here. Allowed values:
before, after, no (as for 'lower_user' above)
Allow the insertion of RFC 2858 tags with a zero value. Normally, zero indicates an
unused tag, and in string attributes (for example, Tunnel-Private-Group-Id) a zero tag
would be omitted. However, some vendors require the tag to be present even if it is
zero. In this case, setting this to 'yes' will allow the insertion and use of a zero tag.
Default is 'no' (RFC 2868 compliant). Allowed values: no, yes
Specify this option to enable support for authorization-only RADIUS requests, which
have the Service-Type attribute set to the value "Authorize-Only" and do not contain a
User-Password attribute.
Default is 'no'.
Allowed values: no, yes
Reference | 411