Changing Web Server Configuration; System Information - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Changing Web Server Configuration

High-traffic deployments may need to adjust certain performance options related to the system's Web
server. Use the Web Server Configuration command link to adjust these configuration parameters.
The Maximum Clients option specifies the maximum number of clients that may simultaneously be
making HTTP requests. The default value should only need to be increased for high-traffic sites.
Persistent HTTP connections (also known as pipelining) may be enabled using the Enable persistent
HTTP connections check box. This feature is only supported for HTTP 1.1 compliant clients.
Click the Save Changes button to apply the new Web server configuration parameters. Changing the
parameters requires the Web server to be restarted, which will be performed immediately. Other users of
the system may find the system is unavailable for a short period while the restart takes place.

System Information

The System Information link on the Administrator > System Information page provides a summary of
hardware, operating system and software information, as well as a snapshot of the current state of the
system.
330 | Administrator Tasks Amigopod 3.7 | Deployment Guide