Table 13 Ldap Error Messages - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

You can also verify operator authentication when you create a new LDAP server configuration using the
Test Settings button on the LDAP Configuration form ( See
for a description).
Looking Up Sponsor Names
This option is only available if sponsor lookup has been enabled for the server on the Edit Authentication
Server page.
1. To look up a sponsor, select a server name in the LDAP Server table, then click the Test Lookup link.
The Test Operator Lookup area is added to the LDAP servers list.
2. In the Lookup field, enter a lookup value. This can be an exact username, or you can include
wildcards.If you use wildcards, the search might return multiple values.
3. In the Search Mode field, use the drop-down list to specify whether to search for an exact match or use
wildcard values.
4. (Optional) Click the Advanced check box to display detailed authorization information for the specified
sponsor.
5. Click
Cancel to cancel the test. The Authentication Test area is added above the server names to indicate the
search's progress.
Troubleshooting Error Messages
The error messages in the following table can be used to diagnose error messages such as: "LDAP Bind
failed: Invalid credentials (80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error,
data 525, vece), bind DN was: ..."

Table 13 LDAP Error Messages

Error Data
525
52e
530
531
532
533
701
124 | Operator Logins
Search Directory to attempt to find sponsor names that match the lookup values, or click
Reason
User not found
Invalid credentials (password is incorrect)
Not permitted to log on at this time
Not permitted to log on at this workstation
Password has expired
Account is disabled
Account has expired
"Creating an LDAP Server"
Amigopod 3.7 | Deployment Guide
in this chapter