Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual page 262

To create a bin or a classification group, click the
Groups list view.
You are required to choose the classification method and the Source Field to use for the classification.
The
Editor.
The available classification methods are explained below:
Discrete bins from start and stop values – See

formula description. The bin classification requires two source fields from a data record. The bin
formula is applied to both source field values to obtain start and stop bin numbers. The data record is
classified with each bin number between the start and stop numbers, inclusive of the endpoints of the
range. The bin offset is used to account for time zones. See
this chapter for a description.
Discrete bins from value of source field – See

description. The bin classification method applies the bin number formula, described in the , to the value
of the source field to calculate a bin number for the data record.
Groups that have same value of source field – This group classification method collects together all

data records that have the same value for the specified source field, ignoring case.
Groups that have same value of source field (case sensitive) – This group classification method

collects together all data records that have the same value for the specified source field.
262 | Report Management
Create Classifier tab can be accessed from the Classification, Bins or Groups options in the Report
Create Classifier tab in the Edit Classification
"Data Sources" in this chapter for a bin number
"Binning Example – Time Measurements"
"Data Sources" in this chapter for a bin classification
Amigopod 3.7 | Deployment Guide
in