Importing A List Of Network Access Servers - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Trendnet

Xirrus

RFC 3576 is used by the RADIUS server to request that a NAS disconnect or reauthorize a session that was
previously authorized by the RADIUS server.
If your NAS vendor is not listed, select the "Other NAS" option. If the NAS is known to support RFC 3576,
select the "RFC 3576 Dynamic Authorization Extensions Compatible" option. See
Authorization"
The Shared Secret is used to ensure the security of the authentication request to the Amigopod Visitor
Management Appliance. It can be a passphrase or a random set of ASCII characters up to 64 characters in
length. The term "shared secret" is used as the same value must be configured on both the RADIUS client
and the RADIUS server.
The Web Login check box is displayed when certain vendors are selected. Select this option to
automatically create a corresponding RADIUS Web Login page for this NAS. See
Authorization"
Click the
Reset Form button to cancel your entry.
Once a NAS entry has been created, it can be edited, deleted or pinged by clicking on it.

Importing a List of Network Access Servers

NAS entries may be created from an existing list by uploading it to the Amigopod Visitor Management
Appliance. Click the
process.
The Upload NAS List form provides you with different options for importing a list of servers
.
Amigopod 3.7 | Deployment Guide
in the Guest Management chapter for more information about RFC 3576.
in this chapter for details on customizing this page.
Create NAS Device button to create this NAS. If you do not want to proceed, click the
Import a list of network access servers link on the NAS List page to start the
"RFC 3576 Dynamic
"Example: Time-Based
RADIUS Services | 57