Extended Halt Maximum Power B-Step; Extended Halt Maximum Power G-Step - Intel 5148LV - Xeon Dual Core Active H Datasheet

Features
Table 7-2.

Extended HALT Maximum Power B-step

Symbol
P
EXTENDED_HALT
Dual-Core Intel®
Xeon® Processor LV
5148
P
EXTENDED_HALT
Dual-Core Intel
®
Xeon Processor
5100 Series
P
EXTENDED_HALT
Dual-Core Intel®
Xeon® Processor
5160
Note:
1. The specification is at Tcase = 50
VID when running in HALT state.
2. Processors running in the lowest bus ratio supported as shown in
the processor has executed the HALT or MWAIT instruction since the processor is already operating in the
lowest core frequency and voltage operating point. Values represents SKUS with Extended HALT state
(24 W) and without Extended HALT state (27 W).
Table 7-3.

Extended HALT Maximum Power G-step

Symbol
P
EXTENDED_HALT
Dual-Core Intel®
Xeon® Processor LV
5148/5138/5128
P
EXTENDED_HALT
Dual-Core Intel
®
Xeon Processor
5100 Series
Note:
1. The specification is at Tcase = 35
VID when running in HALT state.
2. Processors running in the lowest bus ratio supported as shown in
the processor has executed the HALT or MWAIT instruction since the processor is already operating in the
lowest core frequency and voltage operating point. Values represents SKUS with Extended HALT state (8 W/
1333 FSB), (12 W/1066FSB) and without Extended HALT state (27 W).
The processor exits the Extended HALT state when a break event occurs. When the
processor exits the Extended HALT state, it will first transition the VID to the original
value and then change the bus to core frequency ratio back to the original value.
Note: Processors running in the lowest bus ratio supported as shown in
the HALT State when the processor has executed the HALT or MWAIT instruction since
the processor is already operating in the lowest core frequency and voltage operating
point.
® ®
Dual-Core Intel Xeon Processor 5100 Series Datasheet
Parameter
Extended HALT State
Power
Extended HALT State
Power
®
Extended HALT State
Power
o
C and nominal Vcc. The VID setting represents the maximum expected
Parameter
Extended HALT State
Power
Extended HALT State
Power
®
o
C and nominal Vcc. The VID setting represents the maximum expected
Min Typ Max
14
24/27
24
Table 2-1, will enter the HALT State when
Min Typ Max
6
8/12/27
Table 2-1, will enter the HALT State when
Unit Notes
W 1
W 1,2
W 1
Unit Notes
W 1
W 1,2
Table 2-1, will enter
93