Loading Tab Paper In Tray 8 (Post-Process Inserter); Change/Confirm The Tray Settings; Change/Confirm The Tray Settings From The All Services; Screen - Xerox 4595 Getting Started

Loading tab paper in Tray 8 (Post-process inserter)

Change/confirm the tray settings

Change/confirm the tray settings from the All Services screen
X e r o x 4 5 9 5 C o p i e r / P r i n t e r G e t t i n g Sta r t e d
1. Hold the center of the paper guides and slide them to the
desired paper size.
2. If the paper in already printed on, load the paper with the
printed side facing up and with the tab side to be fed first.
If paper tray types have been changed, the settings must be
modified to reflect the paper that is loaded in the tray. The
following describes how to change or confirm the paper attributes
of the paper loaded in the trays.
NOTE: The Control Panel screens shown may or may not reflect
your system configuration. The Control Panel screens vary from
system to system and from marketplace to
marketplace. Therefore, the Control Panel screens shown here
are a representation of the type of screens that may be seen on
your particular system
3. Loa din g Pa per
3-11