Leds - NEC Express5800 Series User Manual
Express5800 series;
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
2-22 General Description
LEDs
This section describes indications and meanings of the LEDs on NEC Express5800/ft series.
See "NAMES AND FUNCTIONS OF COMPONENTS" (pages 2-6 through 2-17) for the locations
of each LED.
POWER LED
This LED illuminates in green while the server is powered on. When power is off, this LED does
not illuminate. The LED also illuminates in green when one of CPU/IO modules is powered on.
DISK ACCESS LED
This LED indicates the status of hard disk drives loaded on 3.5-inch disk bays. Whenever the hard
disk drives are accessed, the LED blinks in green.
When this LED illuminates in amber, it indicates a hard disk drive has a problem. You can see the
status of the failed hard disk drive by checking the LED of each hard disk drive.
If this LED is blinking in amber, it indicates volumes in hard disk drives are not mirrored. See
"HARD DISK CONFIGURATIONS THAT CAN BE BUILT ON THE NEC Express5800/ft series"
(page 3-2) to configure mirror volumes.
Advertisement
Table of Contents
Troubleshooting
