NEC Express5800 Series User Manual page 248

5-64 Installing and Using Utilities
Sample screen of Server Maintenance Utility
Main window
[Firmware Update] screen
Even if you do not have the image data of firmware for update, the firmware can be copied from the
other module.
By starting the module, the firmware will be updated automatically. However, when the [Automatic
firmware update] property is disabled, follow the steps below to update the firmware:
1. Start the system using the module of the firmware copy source.
Check the status LEDs of the copy destination component for its current status. If it is running,
stop it.
2. On the [Update] screen of the target component, select [Firmware update].
3. When the [Firmware Update] screen appears, check [Copy online BIOS image to offline] and
execute it.
Firmware is updated by copying the firmware on the online side to the offline side.
[CPU Module] screen