NEC Express5800 Series User Manual page 288

7-16 Troubleshooting
Message
CRC error occurred on the FT
Link.
Accessing to shared memory
with the BIOS failed.
MTBF is below the threshold.
There is a difference between
the BIOS version.
Updating MTBF information
failed.
IPMI driver does not start.
The driver failed to refer the
object of IPMI driver.
Base address reading error.
(NEC GeminiEngine HA
System Controller I/O)
Base address reading error.
(AMD8111 I/O)
The Modules does power down.
Synchronization of the CPU
module stopped.
MC log was gathered.
CMC log was gathered.
It failed in the collection of the
MC/CMC log.
Memory check was completed
successfully.
Meaning
There was a CRC error in FT
Link.
Failed to access the memory
shared with BIOS.
The MTBF of the module is lower
than the threshold.
The BIOS version of the module
#0 and that of module #1 are
different.
Failed to update the MTBF
information.
The IPMI driver is not running.
Failed to refer to the IPMI driver
object.
Base address reading error.
(NEC GeminiEngine HA System
Controller I/O)
Base address reading error.
(AMD8111 I/O)
The module is powered off.
Synchronization of the CPU
module is stopped.
MC log was collected.
CMC log was collected.
Failed to collect MC/CMC log of
the module.
Memory check was completed
successfully.
Action
There may be problem in
the hardware environment.
Contact your sales agent.
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
There may be problem in
the hardware environment.
Contact your sales agent.
If the message is recorded
frequently, there may be
problem in the BIOS
environment. Contact your
sales agent.
There may be problem in
the system environment.
Contact your sales agent.
If the message is recorded
frequently, there may be
problem in the system
environment. Contact your
sales agent.
There may be problem in
the hardware environment.
Contact your sales agent.
The server is operating
normally.
If the message is recorded
frequently, there may be
problem in the system
environment. Contact your
sales agent.
The server is operating
normally.
If the message is recorded
frequently, contact your
sales agent.
The server is operating
normally.