NEC Express5800 Series User Manual page 292

7-20 Troubleshooting
Message
[FT LED: Off] The FC device is
not duplex.
Since removal of each device
was not completed, the driver
was not able to bind the
CPU/IO module.
HAS driver enabled use of
USB.
[FT LED: Off] South Bridge is
not doubled.
[FT LED: Off] PCI Express 0 is
not doubled.
[FT LED: Off] PCI Express 1 is
not doubled.
[FT LED: Off] CPU is not
doubled.
Removal of SCSI device was
not completed.
[FT LED: Off] The doubleness
information about an I/O device
is not reported.
Service is stopped by the notice
of a stop.
Snapshot dump is started.
Stop image dump is started.
Quick dump is started.
It failed in the doubleness
surveillance of a network card.
It failed in the doubleness
surveillance of a SCSI device.
It failed in the doubleness
surveillance of a FC device.
The error occurred in session
creation with client application.
Meaning
[FT LED: Off] The FC device is
not duplexed.
The CPU/IO module cannot be
bound because devices have not
been comopletely removed yet.
The USB queue timed out.
[FT LED: Off] The South Bridge
is not duplexed.
[FT LED: Off] The PCI Express 0
is not duplexed.
[FT LED: Off] The PCI Express 1
is not duplexed.
[FT LED: Off] The CPU is not
duplexed.
The removal processing of the
SCSI device has not been
completed.
[FT LED: Off] The duplexity
information on the I/O device has
not been reported.
The HAS management service is
stopped by an instruction from
the OS.
The dump service of the system
running in the duplex mode is
started.
The dump service of the system
running in the simplex mode is
started.
The quick dump service is
started.
Failed to monitor duplexity of the
network card.
Failed to monitor duplexity of the
SCSI device.
Failed to monitor duplexity of the
FC device.
Failed to create a session for
communication with client
applications.
Action
Take necessary actions
referring to
"Troubleshooting" in the
User's Guide.
The server is operating
normally.
If the error occurs
frequently, contact your
sales agent.
If the error occurs
frequently, contact your
sales agent.
Contact your sales agent.