Master Control Menu - NEC Express5800 Series User Manual

Master Control Menu

Load the attached "NEC
EXPRESSBUILDER" CD-ROM in the
CD-ROM drive of the computer that runs
Windows (Windows 95 or later, or Windows
NT 4.0 or later). The Master Control Menu
starts automatically.
TIPS:
The Master Control Menu may not start
automatically depending on the system status.
In such case, execute the following file on the
CD-ROM from the explorer, etc.
\MC\1ST.EXE
From the Master Control Menu, you can install various kinds of attached software that runs on
Windows and view online documents.
TIPS:
Some online documents are provided in the PDF format. To view these files, you need to
install Acrobat Reader or Adobe Reader of Adobe Systems Incorporated in advance. If either
is not installed, click [Setup] – [Acrobat Reader] first to install Acrobat Reader.
For the Master Control Menu operations, click each item displayed on the window, or use the
shortcut menu displayed by right-clicking the screen.
IMPORTANT:
Make sure to exit online documents and tools started from the Master Control Menu or menu
before removing the CD-ROM from the CD-ROM drive.
Installing and Using Utilities 5-7