NEC Express5800 Series User Manual page 180

4-82 System Configuration
BMC configuration errors
No. Error message
1
Failed to make settings:
2
Failed to acquire BMC
Configuration:
3
Used by other software program.
Try again after a while.
4
Invalid BMC configuration file.
5
The required XML tag is not
found.
6
Failed to write the file.
7
Invalid user name
8
The user name is too long
9
The password is too long.
10
Passwords are not matched.
11
Invalid HTTP port number
12
Invalid SSL port number
13
HTTP/SSL should not be the
same.
14
Invalid login attempt period
15
Invalid failed login attempts
16
Invalid account lock period
17
Invalid IP address
18
Invalid subnet mask
19
Invalid default gateway
20
Invalid DNS server IP address
Action
Check the network environment and try again.
Contact your service representative if the error
persists.
Check the network environment and try again.
Contact your service representative if the error
persists.
Try again after a while.
The BMC configuration file may be corrupted. Check
the file.
The BMC configuration file may be corrupted. Check
the file.
The BMC configuration file is not saved successfully.
Change the location to save the file and try again.
You can use only alphanumeric characters, minus
sign (–), and underscore (_) for a user name. A user
name should be 31 characters or less.
A user name should be 31 characters or less.
Use 16 or less characters.
Enter passwords again.
You can only use numeric values.
You can only use numeric values.
The same port number cannot be specified for HTTP
and SSL. Specify different value.
You can only use numeric values.
You can only use numeric values.
You can only use numeric values.
Use numbers and periods to specify an IP address.
Use numbers and periods to specify a subnet mask.
Use numbers and periods to specify a default
gateway.
Use numbers and periods to specify the IP address of
DNS server.