NEC Express5800 Series User Manual page 289

Message
Memory check failed.
Memory copy was started.
The Module got power down in
the middle of handling failure.
The Module or the CPU module
detected the state change in
the middle of handling failure of
the CPU module so stopped the
action.
The Module BIOS CPU state
did not become [CPU stop
(reset waiting)].
The Module broke down.
The serial number of the
Module was invalid.
Base address reading error.
(PCI Config)
The system abnormality of the
Module was detected.
The POST timeout occurred in
the Module.
The POST error occurred in the
Module.
[Do not bind] is set by MTBF
type.
An illegal type is set to MTBF
type.
The driver accepted to switch
the Secondary Module.
The driver started to switch the
Secondary Module.
The driver finished successfully
to switch the Secondary
Module.
Meaning
Memory check failed.
Memory copy was started.
The module was powered off
while troubleshooting an error.
The processing was stopped
because a change in the CPU
module state was detected while
troubleshooting a CPU error.
The CPU state of BIOS did not
become [CPU stop (reset
waiting)].
The IO module failed.
The serial number of the module
is invalid.
Base address reading error.
(PCI Config)
Abnormality in the module was
detected.
A POST timeout occurred in the
module.
A POST error occurred in the
module.
The MTBF type of the module is
set to [Do not bind].
The specified MTBF type of the
module is invalid.
The driver received an instruction
to switch the secondary module.
The driver started switching the
secondary module.
The driver successfully switched
the secondary module.
Troubleshooting 7-17
Action
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
The server is operating
normally.
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
There may be problem in
the hardware environment.
Contact your sales agent.
If the message is recorded
frequently, there may be
problem in the system
environment. Contact your
sales agent.
There may be problem in
the hardware environment.
Contact your sales agent.
If the message is recorded
frequently, there may be
problem in the system
environment. Contact your
sales agent.
There may be problem in
the system environment.
Contact your sales agent.
The server is operating
normally.