Event Log - NEC Express5800 Series User Manual

Event Log

HAS Daemon-related logs are recorded in the system event log.
When you manage servers using NEC ESMPRO Manager, the following message
may be recorded in the system event log. This message does not indicate an event
that impacts operations. However, if it is recorded frequently, there may be
problem in OS or the software environment. Contact your sales agent.
Source:
Type:
Event ID:
The following message may be recorded in the system event log for operation or
replacement maintenance of each network adapter, SCSI disk or fibre channel.
This message does not indicate an event that impacts operations. However, if it is
recorded frequently or even when maintenance procedures are followed, there
may be problem in OS or the software environment. Contact your sales agent.
Source:
Type:
Event ID:
hasftctl-related logs are recorded in the system event log.
The following message may be recorded in the system event log. This log does not
indicate an event that impacts operations. This message informs that the CPU
modules are no longer in the duplex mode. However, dual configuration is to be
set to the CPU modules again, so this warning does not indicate any impact on the
system operation.
Source:
Type:
Event ID:
Description: The driver failed the fast re-sync function of the CPU module.
Source:
Type:
Event ID:
Description: The error occurred on the CPU module.
Source:
Type:
Event ID:
Description: The error occurred on the CPU module.
Source:
Type:
Event ID:
Description: CPU is not doubled.
HAS Daemon
Warning
800000cc – 800000d2
HAS Daemon
Warning
800000cc – 800000d2
hasftctl
Warning
800704B2
hasftctl
Warning
80070DAC
hasftctl
Warning
80070fa0
hasftctl
Warning
40071209
Troubleshooting 7-31