NEC Express5800 Series User Manual page 190

5-6 Installing and Using Utilities
The customer should prepare the floppy disks for creating the support disks.
ROM-DOS Startup FD
The support disk for starting the ROM-DOS system is created.
Off-line Maintenance Utility FD
Creates a support disk for activating the Off-line Maintenance Utility.
System Diagnostics Utility FD
The support disk for starting the system check program is created.
System Management Function FD
The support disk for system management functions is created.
BIOS/FW/etc. Update
The program which is necessary for the update work is transferred to the floppy disk which the
various update modules of BIOS/FW were stored in. After the reboot, an update program is
started automatically from the floppy disk, and various BIOS/FW's are updated.
IMPORTANT:
During the execution of the update program, do not turn off the power of the system. If
the update is interrupted halfway, the system will not be able to be started.
Initialize Remote Management Card
Allows you to configure ft Remote Management Cards with correct parameters of the system
where they are installed. In order to use this menu, modules must be mounted to both systems.
IMPORTANT:
This menu appears when optional ft Remote Management Cards are installed.
System Management functions
Allow you to make settings of BMC (Baseboard Management Controller) to use its report
functions and remote control from the management PC.
Help
Indicates the descriptions on several features of the NEC EXPRESSBUILDER.
Return to the Top Menu
Indicates the NEC EXPRESSBUILDER top menu.