Searching For A Radio Station With The Scanner; Manual Search For A Radio Station - Silvercrest CDV-710 User Manual

Note:
After selecting a range, the station last selected in this range will be heard.
When the monitor is open, the "BAND" button
selection of the wavelength range.

14.3 Searching for a radio station with the scanner

To set the stations, select the desired wave band with the "BAND" button
order to begin searching in the desired direction, briefly press the five-way multifunction button
. Press the button towards the left to diminish the search frequency or to the right to increase
the search frequency. The scanner will stop at the next available station.
When the monitor is open, the buttons
to change the frequency.

14.4 Manual search for a radio station

In order to select a station manually, press the five-way multifunction button
seconds towards the right or left. The display will indicate "MANUAL". Now press the five-way
multifunction button
frequency until the desired frequency is indicated on the display. The frequency will change in
50kHz increments in the FM range. If there is no entry for about seven seconds, the device will
switch back to automatic station search. The display will indicate "AUTO".
When the monitor is open, the buttons
to change the frequency. Here you also have the option to search manually, by pressing one of
the buttons and
there is no entry for about seven seconds, the device will switch back to automatic station
search. The corresponding field on the screen will indicate "AUTO" again.
and
towards the right to increase the frequency, or to the left to diminish the
and
for three seconds. MANUAL will be indicated in the corresponding field. If
on the screen is also available for the
on the on-screen keyboard are also available
on the on-screen keyboard are also available
(section 13.2). In
for about three
37