Loud Function For The Tone Setting – Loudness; St – Mo Function To Switch Between Stereo And Mono Playback - Silvercrest CDV-710 User Manual

21.2 LOUD function for the tone setting – loudness
The "LOUD" function makes it possible to emphasize low and high frequencies through the
push of a button in order to increase sound perception in an adjustment to the respective
volume.
To activate the "LOUD" function, press the control dial
"LOC" function will appear. Press the control dial
"LOUD". There you will have the option of activating ("LOUD ON") or deactivating ("LOUD OFF")
the function by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
through automatic memory (don't change anything on the device for approx. five seconds). If
you confirm the selection by pressing the control dial
If you use the automatic memory, the device will return to the standard display.
Note:
When the "LOUD" function ("LOUD ON") is activated, the message "LOUD" appears on the
display. This is turned off after deactivation.
21.3 ST – MO function to switch between stereo and mono playback
This menu item gives you the option of selecting between stereo and mono playback.
To reach the menu, press the control dial
will appear. Now briefly press the control dial
MO". There you will have the option of selecting between "ON" and "OFF" by turning the dial.
The selection "ON" will turn the mono playback on. "OFF" will turn the stereo playback back on
again.
56
until menu level 2 is reached. The
repeatedly until you get to the menu item
, you will reach the next possible setting.
until menu level 2 is reached. The "LOC" function
repeatedly until you reach the menu item "ST-
or