Menu Settings Level 1; Changing The Bass Settings (Bass); Changing The Treble Settings (Treble) - Silvercrest CDV-710 User Manual

20 Menu settings level 1

By briefly pressing the volume control dial
1, volume control, bass setting, treble setting, and the speaker balance between the left and
right as well as front and rear speaker groups can be selected and set.

20.1 Changing the bass settings (BASS)

Pressing the control dial
will appear on the display together with the current level (e.g. B. "+2"). To change the bass
bandwidth, turn the control dial
a range between "-7" and "+7". It can be changed in increments of one.
The setting is saved either when the desired value is confirmed by pressing the control dial
through automatic memory (don't change anything on the device for approx. five seconds). If
you confirm the selection by pressing the control dial
If you use the automatic memory, the device will return to the standard display.

20.2 Changing the treble settings (TREBLE)

After pressing the control dial
message "TRE" will appear on the display together with the current level (e.g. "0"). To change
the bandwidth of the treble, turn the control dial clockwise or counter-clockwise. The bandwidth
can be set in a range between "-7" and "+7". It can be changed in increments of one.
The setting is saved either when the desired value is confirmed by pressing the control dial
through automatic storage (don't change anything on the device for approx. five seconds). If you
confirm the selection by pressing the control dial
you use the automatic memory, the device will return to the standard display.
52
once or several times, the functions of menu level
twice will result in reaching the bass settings. The message "BAS"
clockwise or counter-clockwise. The bandwidth can be set in
twice, the treble setting (TREBLE) can be reached. The
, you will reach the next possible setting.
, you will reach the next possible setting. If
or
or