Thumbnail View - Silvercrest CDV-710 User Manual

the image by means of the arrow buttons on the remote control as well as the five-way
multifunction button
To end the zoom function again, press the ZOOM button again for approx. three seconds until
the function turns off and the next image is displayed.

18.4 Thumbnail view

With the thumbnail view, you have the option of having the images on the data carrier displayed
in a set of nine small images for each page. To get to this overview, please press the stop
button during the slide show. The arrow buttons of the remote control or the five-way
multifunction button
navigation. By pressing the ENTER button you will confirm your selection.
19 AUX IN
The AUX IN (brown connection cable
connect external audio devices through their headphone or AUX output with this device. The
audio tracks played back on these devices are then put out through the car speakers. This is
how you can e.g. play back audio files that you have saved on your cell phone, minidisk, iPod®
or tape recorder.
To connect external audio devices with the CD/DVD car radio CDV-710, you will need a cable
with an RCA jack (right + left) on a 3.5 mm jack plug, which is not included in the scope of
delivery. First connect this cable to the device - and then the headphone connection or AUX
output of your playback device. Now you can start the playback. Set the volume of the playback
device to a medium level and subsequently regulate the volume with your SilverCrest CDV-710.
If the playback source of the SilverCrest CDV-710 has not been set to AUX yet, please press
the "MODE" button
.
now give you the option of selecting the individual images or the
from illustr. 8.3) is a connection with which you can
until AUX appears on the display.
51