ADMM console commands
If you type "ommconsole" and you have opened the session on the ADMM IP DECT base
station you are able to use the following ADMM related commands:
Please note the "spy" command, which enables you to increase the level of syslog messages
especially for subsystems of the ADMM. This should be only used by the support organization
because it can harm the system operation.
SNMP
In order to manage a large network of IP DECT base stations offers a SNMP agent in each
●
IP DECT base station.
The SNMP agent responds to SNMPv1 and SNMPv2c read requests for the standard
●
MIB-II objects.
The agent supports both SNMPv1 and SNMPv2c traps ('coldStart' , 'nsNotifyShutdown' ,
●
'authenticationFailure' and 'nsNotifyRestart' )
Decoding SNMP messages with your network management system or MIB browser
●
always requires the publicly available IETF MIB definitions which can be downloaded.
Please see
SNMP
overview about the MIB II objects.
on page 46 for configuration of SNMP and
MIB-II
on page 104 to get an
Issue 1 August 2006
Diagnostic
97