Installation and Configuration
The following parameters can be configured using the ADMM web service:
Read-only Community
●
System Contact
●
Activate Trap Handling
●
Trap Community
●
Trap Host IP Address
●
The community names are used for both SNMPv1 and SNMPv2c.
The IP DECT base station needs an initial ADMM connection to receive its SNMP configuration.
After that this data is persistent against resets. Changing the SNMP configuration forces all
agents to be reconfigured.
The agent does not support MIB-II write access, SNMPv2-MIB read/write access,
NET-SNMP-MIB read/write access, NET-SNMP-AGENT-MIB read/write access and SNMPv3.
Backup
The web service interface allows to save a copy of the current configuration on the local host
(host where the browser application is executed) as well as to restore an older configuration.
The configuration file is a checksum protected, compressed and readable file.
Restoring a previously saved configuration will lead to a reset of the ADMM to take effect.
48 Avaya IP DECT Installation, Administration, and Maintenance