Avaya Communication Manager IP DECT Installation, Administration And Maintenance Manual page 99

When all links have been established, the DECT data of the system are automatically read out
and entered in the tables "RFP-Table" and "PP-Table". This procedure is called "Config
Request".
Next, the defined trace options (Event Mask) are sent to the ADMM. The options which are sent
to the ADMM are always those which were active the last time the program was exited.
If the trace option "Transaction establish/release" is activated, the ADMM will deliver all existing
transactions.
Following this, the ADMM system delivers the desired trace data. The user can either
communicate with the program interactively (see below) or he can simply activate a log file in
which to record the data.
Following this initialisation, the user can carry out the following modifications:
The trace settings can be modified using the menu item Options-Event Mask.
●
Transmission to the ADMM takes place after confirmation of the settings with <OK>.
A Config Request can be sent again to the ADMM.
●
Diagnostic
Issue 1 August 2006 99