Cables; Dte Cable - Avaya IP Office 3.0 Installation Manual

IP Office Installation

Cables

Cables
This section provides information about the cables that are used with IP Office. Refer to page 3 for port
pin out details. All of the following cables are for internal use only. All structured cabling/site wiring must
conform to all local regulations.
Cautions:
1. All ISDN and WAN cables should not be longer than 5 meters in length.
2. For Analog Trunk cables, to reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.

DTE Cable

SAP Code.:- 700213432 (25 Way)
A. 25 Way (or 9 Way on IP412) D-Type Plug with UNC 4-40 locking screws.
B. 9 Way D-Type Socket with UNC 4-40 locking screws.
C. 2 core screened cable - each core is 7/0.203mm (24 AWG) tinned copper stranded wire, nominal
capacitance of 95pF/m, resistance of 92 /km, screened with tinned copper braid, maximum
working voltage of 440V rms and a Maximum current per core of 1A rms
D. 2 meters/6.57ft.
Pin Connections
End A End A
(25 Way) (9 Way)
2 3
3 2
4 7
5 8
6 6
7 5
8 1
20 4
22 9
Installation Manual
IP Office 3.0
Name
Receive data
Transmit Data
RTS (Request To Send)
CTS (Clear To Send)
DSR (Data Set Ready)
Ground
DCD (Data Carrier Detect) 1
DTR (Data Terminal Ready) 4
RI (Ring Indicator)
End B
3
2
7
8
6
5
9
40DHB0002UKCL Issue 12c (24th February 2005)
Page 74