IP Office Installation
IP400 So8
The So8 Module is only applicable to countries that support the ETSI signaling protocol.
Front View
•
BRI Ports
These are 64k ISDN BRI S-Bus ports and are used for connection to ISDN Telephones, Group 4
faxes, Video conferencing units, etc.
•
WARNING:
BRI phone ports must not be connected to the external ISDN Connections.
Rear View
•
Expansion Port
Used to connect a So8 Module to the Expansion Ports of an IP Office platform.
•
DC Power I/P Socket
Socket for the external 24V DC unregulated power supply (supplied with kit).
•
DTE Port
A 25-way D-type socket. Used for connection to PC (as a diagnostic aid).
IP400 So8 is supplied with one blue Expansion Interconnect cable. See Expansion Interconnect Cable
and Port Pinouts.
Installation Manual
IP Office 3.0
40DHB0002UKCL Issue 12c (24th February 2005)
Page 26