Safety Notes - NEC Express5800 series User Manual

1-2
Notes on Using Your Storage and I/O Blade

SAFETY NOTES

This section provides notes on using the Storage and I/O Blade safely. Read this section carefully to
ensure proper and safe use of the Storage and I/O Blade. For symbols, see "SAFETY
INDICATIONS" provided earlier.
For part names described in the safety instruction chapter in this guide, refer to "Features and
Controls" in Chapter 2.
Do not use the Storage and I/O Blade for services where critical high
availability may directly affect human lives.
The Storage and I/O Blade is not intended to be used with or control facilities
or devices concerning human lives, including medical devices, nuclear
facilities and devices, aeronautics and space devices, transportation facilities
and devices; and facilities and devices requiring high reliability. NEC
assumes no liability for any accident resulting in personal injury, death, or
property damage if the Storage and I/O Blade has been used in the above
conditions.
Do not disassemble, repair, or alter the Storage and I/O Blade.
Never attempt to disassemble, repair, or alter the Storage and I/O Blade on
any occasion other than described in this User's Guide. Failure to follow this
instruction may cause an electric shock or fire as well as malfunctions of the
Storage and I/O Blade.
Do not remove the battery.
Your Storage and I/O Blade contains the lithium and Li-Ion batteries. Do not
remove the battery. Danger of explosion if the battery is incorrectly replaced.
Placing the battery close to a fire or in the water may cause an explosion.
When the Storage and I/O Blade does not operate appropriately due to the
dead batteries, contact your service representative to replace the battery. Do
not disassemble the Storage and I/O Blade to replace or recharge the battery
by yourself.
Do not use the Storage and I/O Blade if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the system and
disconnect the power plug from the outlet, then contact your service
representative. Using the Storage and I/O Blade in such conditions may
cause a fire.
Keep needles or metal objects away from the Storage and I/O Blade .
Do not insert needles or metal objects into ventilation holes in the Storage
and I/O Blade . Doing so may cause an electric shock.
Use the devices only in the specified areas.
CPU blades and Storage and I/O Blade should be installed in the dedicated
Blade Enclosure for their uses. Do not install the CPU blades and Storage
and I/O Blade in a chassis other than the Blade Enclosure. Failure to follow it
may result in fire and/or electric shock to occur.
WARNING