3-10
Setting Up Your Storage and I/O Blade
INSTALLING THE HARD DISK DRIVE
Install a hard disk drive according to the procedure described in Chapter 9.
IMPORTANT:
The hard disk drive is extremely sensitive to static electricity. Make
sure to touch the metal frame of the Storage and I/O Blade to
discharge static electricity from your body before handling the hard
disk drive. Do not touch the pins, leads, or circuitry and place the
hard disk drive directly on the desk. For static notes, see "Anti-static
Measures" in Chapter 9.
Some hard disk drive may contain operating system. Strict care
must be taken when handling it.
Handle the hard disk drive carefully so that the hard disk drive may
not be given excess shocks and vibrations.