NEC Express5800 series User Manual page 41

Removal
1.
Power off the CPU blade to which the Storage and I/O Blade is being connected.
IMPORTANT:
Be very careful to power off the CPU blade that is connected with
the Storage and I/O Blade you are going to remove.
You cannot install or remove the Storage and I/O Blade while the
CPU blade is being powered on.
NOTE:
turned off linking with the CPU blade.
2.
While pushing the eject button on the lower part of Storage and I/O Blade, pull the eject
lever toward you.
IMPORTANT:
Blade.
The power of the Storage and I/O Blade is automatically
Be sure to push the eject lever in the Storage and I/O
Setting Up Your Storage and I/O Blade
3-7