Using Webbios - NEC Express5800 series User Manual

Using WebBIOS

Starting WebBIOS
1.
When the screen as shown below appears, press Ctrl + H to start WebBIOS.
LSI MegaRAID SAS - MFI BIOS
Version XXXX (Build MMM DD, YYYY)
Copyright (c) 20XX LSI Corporation
HA - X (Bus X Dev X) MegaRAID SAS 8708EM2
FW package: X.X.X - XXXX
0 Virtual Drive(s) found on the host adapter.
0 Virtual Drive(s) handled by BIOS.
Press <Ctrl> <H> for WebBIOS.....
POST screen image (with no virtual drive assigned)
IMPORTANT:
Do not press unnecessary key such as Pause during POST.
If you fail to press Ctrl + H or the system proceeds without
displaying the WebBIOS main menu (shown on the next page),
reboot the CPU blade connected with this Storage and I/O Blade,
and press Ctrl + H on POST screen.
Configuring Your Storage and I/O Blade
4-17