NEC Express5800 series User Manual page 67

Express5800 series storage and i/o blade ad106a
Hide thumbs Also See for Express5800 series:
Table of Contents

Advertisement

Item
Battery Backup
Set Factory Defaults
Cluster Mode
Rebuild Rate
BGI Rate
CC Rate
Reconstruction Rate
Controller BIOS
NCQ
Coercion Mode
S.M.A.R.T Polling
Alarm Control
Patrol Read Rate
Cache Flush
Interval
Spinup Drive Count
Spinup Delay
StopOnError
Drive Powersave
Stop CC On Error
Maintain PD Fail
History
Schedule CC
CC Frequency
CC Start Time
Default settings and their explanation
Default
Description
Present
Displays Properties of additional
battery.
None
When battery is installed: Present
When battery is not installed: None
No
Disabled
30
Recommended value: 30
30
Recommended value: 30
30
Recommended value: 30
30
Recommended value: 30
Enabled
Disabled
None
300
Disabled
Disabled: Does not issue an alarm.
Enabled: Issues an alarm.
Silence:
30
Recommended value: 30
4
2
12
Disabled
Disabled
No
Specify the operation at error detection
in Consistency Check.
Yes
No: Recover and resume.
Yes: Abort
Enabled
Supported
Set the scheduled consistency check.
Disabled
Set the interval of scheduled
consistency check.
Disabled: Disables the scheduled
consistency check.
Continuous: Checks consistency
continuously.
Hourly: Checks consistency every hour.
Daily: Checks consistency every day.
Weekly: Checks consistency every
week (recommended value).
Monthly: Checks consistency every
month (recommended value).
12:00 AM
Set the time to start the first consistency
check.
Configuring Your Storage and I/O Blade
Stops an alarm if beeped.
*3
4-23
Change
*1
Prohibited
Prohibited
Permitted
Permitted
Permitted
Permitted
Prohibited
Prohibited
Prohibited
Prohibited
*2
Permitted
Permitted
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Permitted
Prohibited
Permitted
Permitted
Permitted

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8404-001f

Table of Contents