NEC Express5800 series User Manual page 18

1-6
Notes on Using Your Storage and I/O Blade
Optional hard disk drive, mezzanine card, and other electronic components
– These components are extremely sensitive to static electricity. Make sure to touch the
metal frame of the chassis to discharge static electricity from your body before
handling the components. Do not touch the terminals or parts on the components by a
bare hand and place the components directly on the desk.
– Make sure that the options are optional devices for the purchased Storage and I/O
Blade. If an option can be installed or connected to the Storage and I/O Blade, the
option may not operate properly and further the Storage and I/O Blade itself may be
defected.
– The internal option device contains precision component that is easily affected by
drastic temperature change. If the device is used after storage or relocation, make sure
that the device is fully adapted to the operating environment.
Do not use a cellular phone or pager around the Storage and I/O Blade.
Turn off the cellular phone or pager. Radio interference may cause malfunctions of the
Storage and I/O Blade.