Transfer To Third Party - NEC Express5800 series User Manual

TRANSFER TO THIRD PARTY

The following must be observed when you transfer (or sell) the Storage and I/O Blade or software
provided with the Storage and I/O Blade to a third party:
Storage and I/O Blade
Make sure to provide this manual along with the Storage and I/O Blade to a third party.
IMPORTANT:
Be sure to take appropriate measures not to leak important data (e.g.,
customers' information or companies' management information) on the
removed hard disk drive to any third parties.
Data seems to be erased when you empty "Recycle Bin" of Windows or
execute the "format" command of the operating system. However, the
actual data remains written on the hard disk drive. Data not erased
completely may be restored by special software and used for
unexpected purposes.
It is strongly recommended that the software or service (both available
at stores) for data erasure should be used in order to avoid the trouble
explained above. For details on data erasure, ask your sales
representative.
Provided Software
To transfer or sell any software application that comes with the Storage and I/O Blade to a third
party, the following requirements must be satisfied:
All provided software applications must be transferred and no backup copies must be
retained.
Transfer requirements listed in "Software License Agreement" that comes with each
software application must be satisfied.
Software applications that are not approved for transfer must be uninstalled before
transferring the Storage and I/O Blade.
Notes on Using Your Storage and I/O Blade
About data on the hard disk drive
1-7