Toshiba Strata CIX Programming Manual page 71

Table 3-12 Parameter Definitions
Parameter
sys_accept_0_calling_id
sys_active_hold
sys_amis_area_code
sys_amis_country_code
sys_amis_disk_full
sys_amis_enabled
sys_amis_failure_retry
sys_amis_loopback_enable
sys_amis_ltm
sys_amis_max_msg
sys_amis_max_node
Strata CIX Voice Mail Programming
Accept or reject 0 as calling ID in integration packet.
Possible values:
True: Accept 0.
False: (default) Reject 0.
Controls how a caller must select to hold for a busy extension.
Possible values:
True: (default) Caller must continue pressing
extension, enter another extension, or leave a message at the tone.
*
False: Caller selects
allows the caller to hold until the is either transferred, selects
another extension, or presses
Area code of the resident Stratagy ES MAS. Single quotes are required.
Default: blank comment line
Country code of the resident Stratagy ES MAS. Single quotes are required.
Default: comment line starting with 1 for North America.
Percentage of the hard drive that must be free in order for Stratagy ES MAS
to accept new AMIS messages. If free space is less than this figure, The
Stratagy ES MAS tells the calling AMIS system that the hard drive is full.
Default: 5 (percent)
Whether Stratagy ES processes incoming AMIS calls.
Possible values:
True: Voice mail processes incoming AMIS calls.
False: (default) AMIS calls told that this node is not accepting network
calls.
Number of retries after failure.
Possible values: 0~9 (default = 3)
Enables the AMIS loopback test feature.
Possible values:
True: (default) enables feature
False: disables feature
User Agent number to use for the AMIS Loopback mailbox. User Agent other
AMIS nodes can use for testing the network. Any AMIS message to this User
Agent is sent back to the sender, if accessible from this voice mail system.
Possible values: valid User Agent number.
Default: 989
Maximum number of messages the AMIS system can receive.
Default: 1000
Maximum number of remote nodes (Gateway and Proxy User Agents) that
can be in the network. If the actual number exceeds this value, some nodes
are inaccessible.
Possible values: 1~256 (default = 255)
01/07
Voice Mail Configuration
Description
*
to hold for a busy
once to hold for a busy extension and the system
*
again to leave a message.
Parameters
3-31