Toshiba Strata CIX Programming Manual page 156

Unified Messaging (UM)
Server Installation
Table 7-1 System Parameter Definitions (continued)
Parameter
sys_smtpserver_maxconn
sys_smtpserver_types2accept
sys_um_directory suffix
sys_um_subject_fax_only
sys_um_subject_voice_only
sys_um_subject_voicefax
sys_um_unknown_name
7-8
Defines the maximum number of connections allowed to this voice mail
SMTP server by client applications. If set to zero, then the server is not
available to the client.
UM client seats are fixed to mailboxes. This value can be used to limit net
work traffic, if necessary.
Default: 10
Defines MIME types that this voice mail server accepts as voice messages.
Note There is no validation for this field.
Default: audio/x-wav audio/wav audio/microsoft-wave
Enables UM users to effectively use the same address (name) for both the
SES mailbox addresses and the e-mail address. Text value to be appended
to the From field when sending Unified Messaging e-mails.
Default: None
Appears in Subject field on Message inbox to identify the type of message
received.
Note This parameter is not currently supported.
Default: Stratagy Fax Message
Appears in Subject field on Message inbox to identify the type of message
received.
Default: Stratagy Voice Message
Appears in Subject field on Message inbox to identify the type of message
received.
Note This parameter is not currently supported.
Default: Stratagy Voice and Fax Message
Configures a name for unknown senders in SES.
Example: Anonymous, unspecified
Note Some anti-spam filters do not pass on e-mail from ambiguous sources.
Check with your e-mail administrator for acceptable entries.
Default: unknown
Description
Strata CIX Voice Mail Programming 01/07