Toshiba Strata CIX Programming Manual page 82

Voice Mail Configuration
Parameters
Table 3-12 Parameter Definitions (continued)
Parameter
sys_rings_no_answer
sys_security_code_suffix
sys_sendfax_line_group
sys_short_direct_send
sys_short_pause
sys_skip_to_record
sys_smdi_tcpport
sys_smtp_retry_count
sys_smtp_retry_delay
3-42
When a mailbox is transferring a call to an extension, it needs to know how
many ringback cycles to wait before signalling a no-answer. This value is
used if the mailbox doesn't provide its own setting.
Default: 3
Defines the suffix used in constructing the default security code. The default
security code for a mailbox number is the mailbox number suffixed with the
value specified in this option.
For example: Assume that you specify the suffix value as 335, the default
security code for Mailbox 200 generated by the system would be 200335.
Default: 997
The name of the notification port group to use when sending fax
transmissions. This applies to the user mode fax features, the SENDFAX
application and IVR programs that send faxes.
By creating a notification port group, then assigning that port group to this
configuration variable, you can limit fax transmissions to the member ports of
that group.
Note This parameter is not currently supported.
Default: Q1 (enables any line to be used)
What voice mail plays when the Direct Message Mailbox Number (usually
998) is entered followed by the mailbox number.
Possible values:
True: "You entered" and the user's name recording plays.
False: (default) Mailbox's current greeting plays (as if received a Ring No
Answer).
Duration of the short pause in ms.
Default: 500 (.5 secs.)
Enables a caller to press # and skip over a user's personal greeting and go
directly to recording a message.
Possible values:
A caller can press # during the user's mailbox greeting to skip past
True:
the greeting and the prompt to begin recording immediately.
False: Only the greeting is skipped and the prompt plays before recording
begins.
Defines the port number that Stratagy SMDI/SMDI+ TCP server is listening
on.This value must match with the IP Port configured in the CIX for IP SMDI.
Default: 1000
Defines the maximum number of retries for sending voice messages to the
E-mail server.
Default: 5
Number of milliseconds voice mail waits between retries for
sys_smtp_retry_count.
Default: 60 (milliseconds)
Description
Strata CIX Voice Mail Programming 01/07