Table of Contents
Advertisement
5.
Select chunk size from 8k, 16k, 32k, 64k or 128k,
then press Enter.
6.
Select the first drive, press Enter.
7.
Select the second drive, press Enter.
8.
Input the RAID size, press Enter.
9.
When asked Are You Sure (Y/N)?, press Y to accept.
10. Press Ctrl+E to exit the BIOS.
11. When asked Are you sure to exit (Y/N)?, press Y to
exit and reboot.
12. Continue with Fdisk and Format steps as if you
were installing a conventional hard drive.
RAID 1 (Mirror)
For New/Blank Hard Drives
1.
As the BIOS boots press Ctrl+S or F4 when prompted
to enter the RAID BIOS.
2.
At the next screen select Create RAID Set, then
press Enter.
3.
At the next screen select RAID1 then press Enter.
4.
Select Auto configuration, then press Enter.
5.
Input the RAID size, press Enter.
6.
When asked Are You Sure (Y/N)?, press Y to accept.
7.
Press Ctrl+E to exit the BIOS.
8.
When asked Are you sure to exit (Y/N)?, press Y to
exit and reboot.
9.
Continue with Fdisk and Format steps as if you
were installing a conventional hard drive.
For Existing Hard Drives with Data
1.
As the BIOS boots press Ctrl+S or F4 when prompted
to enter the RAID BIOS.
7
Advertisement
Table of Contents
