1.
Install your hard disk drive(s) in the chassis.
2.
Connect the Serial ATA hard disk drive to the system
power supply using the included Dual Connector
Serial ATA power cable.
Note: For hard drives with both SATA power
connector and legacy 5-pin connector, use either the
SATA power connector or the legacy 5-pin power
connector. Using both power connectors may
damage the hard drive.
3.
Connect one end of the Serial ATA cable to the hard
disk drive.
4.
Attach the other end of the Serial ATA data cable to the
Serial ATA connector on the SATA II PCIe RAID.
Figure 3. Connecting the Serial ATA data cable(s)
4
Figure 2. Hard disk drive connections
Serial ATA cable
Power cable
Serial ATA cable