Table of Contents
Advertisement
SATARaid5 GUI
The SATARaid5 GUI provides the user an easy way to
monitor your RAID set.
SATARaid5 GUI Installation
Note: Windows 2000 SP4 or later is required for installation.
1.
Insert the driver installation CD.
2.
At the Windows desktop click Start, then Run.
For Windows 7/ Vista / Server 2008: In the Start
Search box, type D:\gui\setup.msi, press Enter.
(Change D: to match your CD-ROM drive letter)
For XP / Server 2003: Type D:\gui\setup.msi, then
click OK. (Change D: to match your CD-ROM drive
letter)
For Windows 2000: Type D:\gui\setup2000.msi,
then click OK. (Change D: to match your CD-ROM
drive letter)
3.
Follow the on-screen instructions to complete the
installation.
SATARaid5 GUI Overview
The installation program configures the SATARaid5 GUI
to automatically start when Windows is started. If the
GUI does not automatically start or is closed by the user,
choose the SATARaid5 program from the start menu to
launch the program. Upon launching the GUI, the main
window should appear similar to the following.
19
Advertisement
Table of Contents
