SIIG SATA II PCIe RAID Quick Installation Manual page 24

RAID Group Menu Commands
Create RAID Group
This command displays a dialog box to let user create a
RAID group, the user needs to specify the following
parameters:
RAID Group Label: Provides a name for the RAID
group.
RAID Group: Select a group ID from the available ID list.
Configuration:
Striped: for RAID 0; Mirrored: for RAID 1
Capacity: Select from a list of RAID group sizes. Selecting
MAX will create the largest RAID set possible with the
drives selected.
Chunk Size: Select one size from the available list. This
setting is for RAID 0 (Stripe) set only.
Rebuild Priority: Select from the available list. RAID 0
and virtual disk do not require this. 10 is the highest level
of rebuild priority which means that rebuild times will be
faster but will take more CPU resources to rebuild.
Devices: Select RAID member devices from the available
device segment list.
Rebuild RAID Group
This command displays a dialog box to let the user
choose a replacement segment to rebuild a non-fault
tolerant RAID group.
Delete RAID Group
This command displays a dialog box to let the user
choose RAID groups to delete.
24