SIIG SATA II PCIe RAID Quick Installation Manual page 13

When Windows installation completes, go to SATARaid5
GUI on page 19 and install the RAID utility.
For An Existing Installation
1. Setup the RAID array prior to driver installation and
boot up to Windows.
2. At the Found New Hardware window, click Locate
and install the driver automatically (recommended).
3. Click Don't search online. Insert the driver CD.
4. Click Close to complete the installation.
When Windows resumes, go to SATARaid5 GUI on
page 19 and install the RAID utility.
To Verify Windows Server 2008 Installation
1. Right click Computer, click Manage, select Device
Manager.
2. Double click Storage controllers, then double click
Silicon Image Sil 3132 SoftRaid 5 Controller to
display driver properties. A message This device is
working properly is displayed in the dialog box, the
driver has been correctly installed.
Windows Vista
For A New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Windows installation procedure.
3. At Where do you want to install Windows?, click
Load Driver.
4. Insert the driver CD, click Browse.
5. Double click your CD-ROM drive,
For 32-bit Windows Vista: select 32bit, then click OK.
For 64-bit Windows Vista: select 64bit, then click OK.
™
13