Software Installation - SIIG SATA II PCIe RAID Quick Installation Manual

Software Installation

This section provides information on how to install the
SATA II PCIe RAID drivers.
Windows 7
For A New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Windows installation procedure.
3. At Where do you want to install Windows?, click
Load Driver.
4. Insert the driver CD, click Browse.
5. Double click your CD-ROM drive,
For 32-bit Windows 7: select 32bit, then click OK.
For 64-bit Windows 7: select 64bit, then click OK.
6. Select Silicon Image SiI 3132 SoftRaid5
Controller..., then click Next.
7. Follow the on-screen instructions to complete
Windows 7 operating system installation.
When Windows installation completes, go to SATARaid5
GUI on page 19 and install the RAID utility.
For An Existing Installation
1. Setup the RAID array prior to driver installation and
boot up to Windows.
2. Right click Computer, click Manage, select Device
Manager.
3. Double click RAID Controller, then click Update
driver.
4. Insert driver CD, click Browse my computer for
driver software.
11